leftbar
leftbar
Adaptec RAID 1430SA
PCI Express x4, 4-port SATA 3Gb/s supporting RAID 0, 1, 10
4 Serial ATA 3Gb/s ports, PCIe x4, low-profile form factor with Native Command Queuing, RAID 0, 1, and 10 for desktops, workstations and entry-level servers
Adaptec RAID 1430SA
Product DescriptionTechnical SpecificationsPurchase Options
Product DescriptionTechnical SpecificationsPurchase Options
Product DescriptionTechnical SpecificationsPurchase Options

Serial ATA 3Gb/s, the successor technology to SATA for data storage, is a point-to-point connection that delivers full throughput to each storage device by allowing multiple ports to be managed by a single controller.

The Adaptec RAID 1430SA card is a four-port controller featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1430SA supports up to four 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity. The Adaptec 1430SA supports Windows® 2000, Windows Server 2003, Windows XP, RedHat Linux, SuSE Linux, and NetWare.
 Eigenschaften und Vorteile
 Leistungsmerkmale
4 Serial ATA 3Gb/s Ports for support of up to 4 SATA disk drives
PCI Express x4 host interface
RAID 0, 1, 10, and JBOD
Native Command Queuing
48-bit LBA support for drives above 137GB
Low-profile form factor
Bootable array support
RoHS compliant
Komplette Liste der gestützten Betriebssysteme
 
Unterstützte Betriebssysteme
Microsoft Windows
Red Hat Linux
SuSE Linux
Novell NetWare

For a detailed list see ASK Answer ID 14857
Vorzüge
  Low-cost Serial ATA 3Gb/s RAID card with HostRAID™ RAID 0, 1 and 10 for data protection and increased performance
Hauptunterscheidungsmerkmale
 
  • PCI Express x4
  • RAID 0, 1, 10, and JBOD
  • Native Command Queuing (NCQ)
  • Supports bootable arrays
  • 48-bit LBA supports large capacity drives
  • Low-profile form factor
  • RoHS compliant
Kundenanforderungen
  Ideal for desktop and workstations as well as entry-level servers requiring low cost SATA RAID 0, 1, and 10.
Systemumgebung
  Small office and home office as a boot device for print, file, and storage servers.
Anzahl der Geräte
Up to 4 SATA II 3Gb/s or SATA I 1.5 Gb/s disk drives
Bussystem Schnittstellentyp

PCI Express 4-lane 2.5 Gb/s
Externe Anschlüsse
None
Interne Anschlüsse

4 stacked SATA connectors
Datenübertragungsrate
up to 3 Gb/s per port
Systemvoraussetzungen

Intel or AMD Architecture with available PCI Express x4 slot
Paketinhalt
  • Adaptec 1430SA controller with full-size bracket
  • Four 1-meter Serial ATA cables
  • Low-profile replacement bracket
  • Quick Install Guide
  • Bootable Installation CD containing:
        -- Operating system drivers
        -- Complete user documentation (pdf)
  • Adaptec Storage Manager CD containing:
        -- Adaptec Storage Manager GUI software
        -- Complete user documentation (pdf)
Garantie
3 years

Board Dimensions

2.5 inch H x 4.7 inch L
6.4 cm H x 11.3 cm L

Operating Temperature

0° to 55° C

Power consumption

0.9 amps@+5V
---
rightbar
rightbar