Verify that the LED cable is fitted so that RAID controller J10 pins 10, 12, 14 and 16 are correctly connected to CN2 pins 1 to 4 (as per the table below).
|
Firmware Version |
|
15323 or higher |
|
Cable Requirements: Data cable internal Mini Serial Attached SCSI x4 (SFF-8087) to (4) SATA, 1 x LED cable
Chenbro Order Number: 26H113215-009 (data cable) Chenbro Order Number: 26H113322-001 (LED cable) |
||
|
Description |
Adaptec 3405 Connector |
Backplane Connector |
|
26H113215-009 |
CON0 - 0 |
CN12 |
|
CON0 - 1 |
CN22 | |
|
CON0 - 2 |
CN32 | |
|
CON0 - 3 |
CN42 | |
|
26H113322-001 |
J10 pin 10 |
CN2 pin 1 |
|
J10 pin 12 |
CN2 pin 2 | |
|
J10 pin 14 |
CN2 pin 3 | |
|
J10 pin 16 |
CN2 pin 4 | |