leftbar
leftbar
Installing 2940U2W in Netware 3.12

Installation Instructions for AIC78U2 when installing in an existing NetWare v3.12 installation
 
  1. Download NWPA_UP.exe from http://developer.novell.com/devres/sas/certinfo.htm
  2. Copy NWPA_UP.EXE to c:\Server.312 directory
  3. Change to that directory
  4. Execute NWPA_UP.EXE
    (Note: If NetWare has already been updated with the latest patch file, 312PTD.EXE, you will be prompted to overwrite the file. Answer 'N'. If Netware has not been updated to 312PTD, answer 'Y')
  5. If 312PTD has not been installed previously, execute 312PTD.EXE from the same directory.
  6. Create the directory c:\Server.312\CDSAVE
  7. Copy the CDROM.NLM to the C:\Server.312\CDSAVE
  8. Copy the AIC78U2.HAM and AIC78U2.DDI file to the C:\Server.312 directory from the 7800 Family Manager Set Lite NetWare directory.
  9. Update the Server with the following command:
    c:\server.312\312PTD\native\loader\lswap c:\server.312\312PTD\native\loader\ loader.exe c:\server.312\server.exe
  10. From the prompt type: server
  11. Load install
  12. Edit the Startup.NCF file. Delete Load CDROM
  13. Enter the following lines after lines already present and save:
    load c:\server.312\312PTD\native\start\npapatch
    load mmattrfx
    load nbi31x
    load nwpaload
    load c:\server.312\AIC78U2
  14. Edit the Autoexec.NCF file, add the following lines after lines already present, then save the file:
    Load after311
    search add 1 c:\server.312\cdsave
    load cdrom
  15. At the console prompt enter the following command:
    load c:\server.312\312PTD\patch312
  16. Install the patches from the c:\server.312\312PTD directory when prompted for a path
  17. Down and EXIT the server
  18. Reboot the server
    (Note: Note the slot number prompt of the AIC78U2. Edit the Startup.NCF file load AIC78U2 command with the parameter slot=x (x is the slot number) for autoload.
 

rightbar
rightbar