Home Support scsi host adapters AHA-2910B |
Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications Select your operating system or software below |
|
Bios Updates and Other Downloadable FilesBios Updates and Other DownloadsIBM OSIBM OS-2MicrosoftMicrosoft DOSMicrosoft Windows 2000 Microsoft Windows 3.1x Microsoft Windows 95 Microsoft Windows 98 Microsoft Windows Millennium Microsoft Windows NT |
Novell NetWareNovell NetWare DownloadsUnixSCO UnixSCO UnixWare |
|
|
|
|
|
|
Number of devices | |
Supports up to 7 total |
Bus System Interface Type |
|
32-bit PCI |
External Connectors | |
50-pin high-density SCSI-2 (female) |
Internal Connectors | |
50-pin standard (male) |
Data Transfer Rate | |
up to 10 MB/sec |
System Requirements | |
IBM-compatible PC-486, Pentium, or above Windows 95, Windows NT, Windows 3.1, MS-DOS 6.0, OS/2, NetWare, SCO UNIX or UnixWare Operating System PCI expansion slot SCSI peripheral |
Package Contents | |
AHA-2910 PCI-to-Fast SCSI card Adaptec EZ-SCSI software (on CD) Adaptec 7800 Family Manager Set® software SCSISelect optimization utility 50-pin internal SCSI ribbon cable (external cable is not included) Quick installation guide Registration card |
Warranty | |
5-year limited warranty |
Device Protocol SCSI1, Peripheral Support Non-bootable Board Dimensions 4.7" (11.9 cm) L Power Consumption +5.0 +/- 0.25 Volts at 2.0 amps maximum Operating Characteristics -5 C to 60 C (23 F to 140 F) Storage Characteristics -55 C to 85 C (-67 F to 185 F) MTBF (mean time between failures, Bellcore) 555,218.6 hours |