Adaptec
 
leftbar
leftbar
Adaptec SmartHBA 2200-16i
24 Gbps PCIe Gen 4 SAS/SATA/NVMe SmartHBA Host Bus Adapter with 16 internal native ports and LP/MD2 form factor
Small Image of Adaptec SmartHBA 2200-16i
DownloadsDocumentationTechnical Specifications

Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications

Select your operating system or software below

Bios Updates and Other Downloadable Files

Bios Updates and Other Downloads

Storage Manager

Storage Manager Downloads

Linux Driver Source

Linux Driver Source Code

Linux Drivers

Red Hat, CentOS, SuSE, Ubuntu,
Debian, Oracle, XenServer


Microsoft

Microsoft Windows 7 x64
Microsoft Windows 8 x64
Microsoft Windows 10 x64
Microsoft Windows 11 x64
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012 x64
Microsoft Windows Server 2016 x64
Microsoft Windows Server 2019 x64
Microsoft Windows Server 2022 x64


Unix

FreeBSD
Sun Solaris

VMware

VMware ESXi 6/7

Open Source

OpenStack Horizon
MAAS
Juju

BMC

StorageCore

Operating System
Microsoft Windows Server, Windows 10, Red Hat Enterprise Linux®, CentOS, SuSE Linux Enterprise Server, Ubuntu Linux, Debian Linux, Oracle Linux, Citrix XenServer, Solaris, FreeBSD, VMware ESXi and open-source Linux drivers/inbox drivers

For a detailed list, visit ASK Answer ID 17509.
CPU Architecture
Intel, AMD
Benefits
Ideal for high performing I/O solutions supporting SAS/SATA/NVMe HDDs and SSDs requiring maximum connectivity
• Fully Tri-mode capable: 16 Gbps NVMe Gen 4, 24 Gbps SAS-4, and 6 Gbps SATA
• Combines full-featured, high-performance HBA functionality with basic hardware RAID
•  Built-in PCIe switch to enable ultra-low latency access to NVMe storage devices
• Superior performance enabling up to 13 GB/s throughput and 3.5M+ IOPs 4K RR
Key Software Features
• Adapter dynamic power management to save up to 30% power
• Supports up to 256 SAS or SATA devices using SAS expanders
• Support for NVMe target devices with Gen 3/4 interfaces (x1, x2, x4, and x8 wide interfaces)
• SAS expander support
• PCIe switch support
• SATA NCQ
• Multi-initiator (host)/clustering for SAS
• Hot-plug drive support
• Automatic/manual rebuild of hot spares
• SGPIO, SES, UBM and VPP enclosure management support
• PBSI, MCTP and Platform Level Data Model (PLDM) and Redfish Device Enablement (RDE) for out-of-band (BMC) management
• S.M.A.R.T. support
• Staggered drive spin-up
• Secure boot, secure updates, and attestation support
• Secure boot support for the uEFI host BIOS
• USB image with offline maxView tools www.adaptec.com/en-us/support/start
Management Utilities
maxView Storage Manager
• Web based GUI Management utility
• OS Support: Windows, Linux, VMware
• Remote configuration, monitoring & notification
• Remote firmware updates
• SMI-S Support
• SMTP

ARCCONF
• Command-line interface

BIOS Configuration Utility (CTRL+A)
• Legacy configuration utility
• Flashable BIOS support

uEFI BIOS Configuration Utility
• Flashable BIOS support
• HII GUI support

ROM-based uEFI BIOS Configuration Utilities
• HII-based pre-boot GUI configuration utility
• Arcconf CLI for uEFI shell
• Flashable BIOS support
Management Utilities (Out-of-Band)
PBSI, MCTP and PLDM/RDE
Data Transfer Rate
Tri-mode support for SAS/SATA/NVMe devices: 16G Gen 4 NVMe, 24G SAS-4 and 6G SATA
Form Factor
MD2 – Low Profile
Package Contents
• Adaptec SmartHBA 2200-16i adapter
• Additional low profile vented bracket
Physical Size
2.535"H x 6.6"L (64mm x 167mm)
Operating Temperature
0°C to 55°C* with 250 LFM airflow. Note: This adapter contains a powerful IO processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with at least 250 LFM airflow.
*Temperature measured 1 inch from adapter.
Regulatory Certification
CE, FCC, UL, C-tick, VCCI, KCC, CNS
Environmental Compliance
RoHS
Warranty
3 years

---

rightbar
rightbar