Adaptec - Adaptec Serial ATA II RAID 1430SA

Home Support

RAID

Adaptec Serial ATA II RAID 1430SA

The Adaptec SATA II RAID 1430SA card is a four-port controller featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1430SA supports up to four 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity.

Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications

Select your operating system or software below

Supported Operating Systems
	Microsoft Windows Red Hat Linux SuSE Linux Novell NetWare For a detailed list see ASK Answer ID 14857

Benefits
	Low-cost Serial ATA 3Gb/s RAID card with HostRAID™ RAID 0, 1 and 10 for data protection and increased performance

Key Differentiators
	PCI Express x4 RAID 0, 1, 10, and JBOD Native Command Queuing (NCQ) Supports bootable arrays 48-bit LBA supports large capacity drives Low-profile form factor RoHS compliant

Customer Needs
	Ideal for desktop and workstations as well as entry-level servers requiring low cost SATA RAID 0, 1, and 10.

System Environment
	Small office and home office as a boot device for print, file, and storage servers.

Number of devices
	Up to 4 SATA II 3Gb/s or SATA I 1.5 Gb/s disk drives

Bus System Interface Type
	PCI Express 4-lane 2.5 Gb/s

External Connectors
	None

Internal Connectors
	4 stacked SATA connectors

Data Transfer Rate
	up to 3 Gb/s per port

System Requirements
	Intel or AMD Architecture with available PCI Express x4 slot

Package Contents
	Adaptec 1430SA controller with full-size bracket Four 1-meter Serial ATA cables Low-profile replacement bracket Quick Install Guide Bootable Installation CD containing: -- Operating system drivers -- Complete user documentation (pdf) Adaptec Storage Manager CD containing: -- Adaptec Storage Manager GUI software -- Complete user documentation (pdf)

Warranty
	3 years


Board Dimensions 2.5 inch H x 4.7 inch L 6.4 cm H x 11.3 cm L Operating Temperature 0° to 55° C Power consumption 0.9 amps@+5V Regulatory Certification FCC, UL, C-tick, CE, VCC Mean Time Before Failure (MTBF) 2,432,722 hours at 40 degrees C