Verifying and Fixing the maxCache Container

If maxCache is enabled for a controller, you cannot complete any other tasks on that controller while maxView Storage Manager verifies and fixes the maxCache Container. Optionally, you can choose to verify the maxCache Container without fixing inconsistent or bad data, or run a coherency check to compare valid pages of the maxCache Container with their corresponding logical drive storage.

To verify and fix the maxCache Container:

  1. Ensure that no activity is taking place on the controller for the maxCache Container.
  2. In the Enterprise View, select the maxCache Container you want to verify and fix.
  3. On the ribbon, in the maxCache group, click Verify.

    The Verify maxCache window opens.
  4. Choose a verification option:
    Option Description
    To repair inconsistent or bad data during verification ...click Verify with fix.
    To verify the maxCache Container without fixing bad data ...click Verify.
    To perform a coherency check on the maxCache meta-data ...click Coherency Check, then select Once or Always from the drop-down list.
  5. Click OK.
    CAUTION:
    Do not power off the system while the verification is in progress. If you do, the verification will stop.

    When the verification is complete, an event notice is generated in the system's event log, at which time you can continue working with the controller.

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: