Enabling Native Command Queuing on a Controller

Native Command Queuing, or NCQ, lets SATA disk drives arrange commands into the most efficient order for optimum performance.

To enable or disable NCQ for the drives on a controller:

  1. In the Enterprise View, select a controller.
  2. On the ribbon, in the Controller group, click Set Properties.

    The Set Properties window opens.
  3. On the General Settings tab, in the NCQ drop-down list, select Enabled or Disabled.
  4. Click Apply.

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: