Enabling Automatic Failover

This function controls the rebuilding of a logical drive when a failed drive is replaced. When failover is enabled, the controller automatically rebuilds a logical drive when a failed disk drive is replaced. When failover is disabled, the logical drive must be rebuilt manually (for more information, see Rebuilding Logical Drives). Failover applies to redundant logical drives only (see Selecting the Best RAID Level).

To enable or disable failover:

  1. In the Enterprise View, select a controller.
  2. On the ribbon, in the Controller group, click Set Properties.

    The Set Properties window opens.
  3. Click the Data Protection tab.
  4. In the Failover drop-down list, select Enabled or Disabled , then click Apply.

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: