README

--------------------------------------------------------------------
README.TXT

Adaptec maxView Storage Manager
Adaptec Command Line Interface Utility (ARCCONF)
Adaptec maxCache Plus Command Line Interface Utility (MAXCONF)

as of February 12, 2014
--------------------------------------------------------------------
Please review this file for important information about issues
and errata that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.

The following information is available in this file:

   1. New Features in this Release
   2. Software Versions and Documentation
      2.1   Utility Software
      2.2   Documentation
   3. Installation and Setup
      3.1   Installation Instructions
      3.2   Supported Operating Systems
      3.3   General Setup Notes
      3.4   Remote Access
      3.5   Windows 8 Setup
      3.6   Linux Setup
      3.7   SLES 11 Host File Configuration 
      3.8   Bootable USB Image Security Warnings 
      3.9   maxCache Plus Setup
            3.9.1  maxCache Plus OS Support
            3.9.2  maxCache Plus Driver Setup and Adapter Support
            3.9.3  Cache Mode Support
            3.9.4  Virtual Volume Size
      3.10  RAW Device Setup
   4. Known Limitations
      4.1   Non-Default Web Server Port
      4.2   Windows Sysprep Issues
      4.3   Login Issues on Windows Domain Server
      4.4   Hot Spare Issues
      4.5   Dual-Controller Systems
      4.6   Email Notifications
      4.7   SGPIO Enclosures
      4.8   Non-RAID Mode Controllers
      4.9   RAID-Level Migrations
      4.10  maxCache Container Migration
      4.11  Display and Refresh Issues
      4.12  Browser Issues
      4.13  Remote System Issues
      4.14  Power Management Issues
      4.15  RAID 50/RAID 60, Max Drives
      4.16  RAID 10 Segment Order
      4.17  RAID 10 Rebuild Order 
      4.18  Verify with Fix
      4.19  Logical Drive Wizard Issues
      4.20  ATA Secure Erase
      4.21  ARCCONF Backward Compatibility
      4.22  ARCCONF Silent Installation
      4.23  MAXCONF Logical Drive Status Issues      
      4.24  Special Characters in Logical Device Names
      4.25  Virtual Pool Delete Error
      4.26  Adaptec Series 6 Controller Issues
      4.27  Speaker Status on SuperMicro SAS2X28 Enclosures
      4.28  Online Help Issues 
      4.29  Uninstallation Issues
      
--------------------------------------------------------------------
1. New Features in this Release
    
  o Support for maxCache Plus caching and tiering software on Windows and Linux
      
    Optimizes storage structure by assigning different categories of 
    data to different storage tiers. Supported on Adaptec Series 8Q/8ZQ 
    controllers. See Section 3.9 for requirements and setup instructions.
  
  o MAXCONF Command Line Interface for managing maxCache Plus virtual pools
    and virtual volumes
    
  o Support for drive spin-up limits in controller power management GUI
    
  o Downloadable installers for all supported operating systems at start.adaptec.com
    (replaces physical media/DVD for installation of maxView Storage Manager and
    other management utilities)
  
  o Bootable USB image, available for download at start.adaptec.com (replaces Bootable DVD)
  
  o New controller modes on Adaptec Series 7 and Adaptec Series 8 controllers (ARCCONF/BIOS only):
  
    RAID: Expose RAW mode (previously, RAID mode)
    RAID: Hide RAW mode
      
  o Bugfixes

--------------------------------------------------------------------
2. Software Versions and Documentation

   2.1 Utility Software
       
       o Adaptec maxView Storage Manager Version 1.05    
       o Adaptec ARCCONF Command Line Interface Utility Version 1.05

   2.2 Documentation 
  
       PDF Format (English/Japanese):
        
       o maxView Storage Manager User's Guide               
       o Adaptec RAID Controller Command Line Utility User's Guide

       HTML and Text Format:

       o maxView Storage Manager Online Help
       o maxView Storage Manager README.TXT file
        
--------------------------------------------------------------------
3. Installation and Setup

   3.1 Installation Instructions

       The Adaptec SAS RAID Controllers Installation and User's Guide
       contains complete installation information for the controllers
       and drivers. The Adaptec RAID Controllers Command Line Utility
       User's Guide contains complete installation information for
       ARCCONF. The maxView Storage Manager User's Guide contains  
       complete installation information for the maxView Storage  
       Manager software.        

   3.2 Supported Operating Systems                           

       Microsoft Windows: 
  
       o Windows Server 2012, 64-bit
       o Windows Server 2012 R2, 64-bit
       o Windows Server 2008 R2, 64-bit
       o Windows SBS 2011 (all versions)
       o Windows 7, Windows 8, Windows 8.1, 32-bit and 64-bit
          
       Linux:

       o Red Hat Enterprise Linux 6.4, 5.9, IA-32 and x64
       o SuSE Linux Enterprise Server 11, 10, IA-32 and x64     
       o Debian Linux 7.0, IA-32 and x64
       o Ubuntu Linux 12, 11, 10, IA-32 and x64
       o Fedora Linux 19, 18, IA-32 and x64
       o CentOS 6.4, 5.9

       Virtual OS Environments:
        
       o VMware ESX 4.1 
       o VMware ESXi 5.5

       Solaris:
          
       o Solaris 10 U9
       o Solaris 11 Express
                           
   3.3 General Setup Notes

       o maxView Storage Manager supports Adaptec Series 8, Adaptec 
         Series 7, and Adaptec Series 6 controllers. It is not backward
         compatible with older Adaptec controller models. 

       o maxView Storage Manager is not supported on FreeBSD. Use 
         ARCCONF to create and manage arrays.
   
       o maxView Storage Manager and legacy Adaptec Storage Manager (ASM) 
         cannot coexist on the same system.

   3.4 Remote Access
   
       maxView Storage Manager requires the following range of ports
       to be open for remote access: 
       
       o 34570-34580 (TCP)
       o 34570 (UDP)
       o 34577-34580 (UDP)
       
       See also Section 4.13 for OS-specific issues and workarounds.

   3.5 Windows 8 Setup
      
       To log in and use maxView Storage Manager on a Windows 8 system,
       you must create a local user account; you cannot use your
       MS Live account. To create a local user account:
          
       1. Log into your MS Live account.       
       2. Select Settings->Change PC Settings->Users->Switch to Local user.     
       3. Provide account details.     
       4. Start maxView Storage Manager and log in with your local user
          account credentials.
 
   3.6 Linux Setup
       
       To ensure that the maxView Storage Manager CIM Server initializes  
       and starts correctly on systems with SELINUX enabled, enter the 
       following commands, as root: 
       
       # cd /usr/StorMan/pegasus/bin 
       # chcon -t textrel_shlib_t /usr/StorMan/pegasus/lib/libpegcommon.so.1         
        (or chcon -t textrel_shlib_t /usr/StorMan/pegasus/lib/lib* if any other binary relocation failed)         

   3.7 SLES 11 Host File Configuration       
       
       To avoid a problem with launching maxView Storage Manager on
       SLES 11 x64 systems with DHCP enabled, ensure that the 
       /etc/hosts file maps the server IP address to a valid host  
       name; the IP address cannot be mapped to localhost.

   3.8 Bootable USB Image Security Warnings
   
       When running maxView Storage Manager from the bootable USB 
       image, you may be prompted with one or more with security 
       warnings before maxView launches. In each case, acknowledge 
       the warning and continue.

   3.9 maxCache Plus Setup

       3.9.1 maxCache Plus OS Support
       
       maxCache Plus is supported on these Windows and Linux OS versions:
       
       o Windows 2008 R2 (x64), Windows Server 2012 (x64)
       o Red Hat Linux 6.4 (x64)
       o SuSE Linux 11 SP3 (x64)
       
       maxCache Plus supports block-level storage devices on the
       supported operating systems only. It does not support storage
       devices on any other OS.

       3.9.2 maxCache Plus Driver Setup and Adapter Support
       
       On Windows systems, maxCache Plus is a selectable feature in 
       the maxView Storage Manager installation wizard. On Linux systems,
       running the maxCache Plus installation script, install.sh, 
       installs the maxCache Plus driver and maxView Storage Manager. 
       (A separate install package allows you to install just maxView  
       Storage Manager on Linux.)
       
       If the installer detects an Adaptec Series 8Q or 8ZQ controller
       and one of the supported OSs, it enables the option to install the
       maxCache Plus driver (on Windows) or it installs the maxCache Plus 
       driver automatically (on Linux). Once the qualifying Series 8Q/8ZQ 
       controller is detected in the setup, maxCache Plus caching and   
       tiering can be used with any block-level storage device on the   
       supported operating systems, either from Adaptec or other vendor,  
       including any other Adaptec controller: Series 6/7/8 (Q,non-Q),   
       select 3rd party controllers, HBAs, and PCIe storage (eg, PCIe flash).
       
       3.9.3 Cache Mode Support
       
       In this release, Cached Volumes support Write-Back and Write-Through
       caching modes. Cached LD Volumes support Write-Through caching only. 
       
       3.9.4 Virtual Volume Size
       
       The maximum size of a virtual volume depends on the chunk size: 
       
       o 64KB chunk size has a maximum 2TB volume size 
       o 256KB chunk size has a maximum 8TB volume size 
       o 1MB chunk size has a maximum 32TB volume size 
       o 4MB chunk size has a maximum 128TB volume size 

  3.10 RAW Device Setup
    
       On Adaptec Series 7 and Adaptec Series 8 controllers, a RAW 
       Pass Through device is analogous to a JBOD, supported by Adaptec  
       Series 6 controllers and older. Any drive without Adaptec RAID 
       metadata is exposed to the OS as a RAW Pass Through device. To 
       remove the Adaptec metadata and convert the drive to a RAW device, 
       use the Uninitialize action in maxView Storage Manager; any 
       existing data on the drive is destroyed. (You can also run 
       uninit from the BIOS or ARCCONF.) For more information about 
       working with RAW devices, see 'controller modes' in the CLI 
       User's Guide, and BIOS 'general settings' in the RAID Controller
       Installation and User's Guide
                        
--------------------------------------------------------------------
4. Known Limitations   

   4.1 Non-Default Web Server Port
   
       The default Web Server port number is 8443. If you install maxView
       Storage Manager with a non-default port number, you will get a 
       'Browser can’t establish connection to the server' error when you
       try to open the maxView login page (even though the login URL
       displays the port correctly; for instance, 
       https://127.0.0.1:8444/maxview/manager/login.xhtml). 
       
       WORKAROUND: Edit the server configuration file and correct the  
       port number manually:
                     
       1. Stop the maxView Web Server: in the Windows Control Panel, 
          select Administrative Tools -> Services, then shut down
          the maxView Web Server service.         
       2. Open the Web Server configuration file at:      
          <maxview install directory>\apache-tomcat-7.0.26\conf\server.xml          
       3. Find the line containing Connector port="8443", then update the  
          port number to the preferred port. For instance: Connector port="8444"         
       4. Restart the maxView Web Server.  

   4.2 Windows Sysprep Issues
   
       On Windows systems, installing maxView Storage Manager with 
       Sysprep (System Preparation tool) kills the maxView desktop 
       icon and Start menu option.
       
       WORKAROUND: Place the shortcuts on the public desktop, making
       them available to all users. The shortcuts will be preserved
       even when the server is Sysprep'ed.
       
       1. From a network share, copy the maxView desktop shortcuts to 
          Libraries\Documents\Public Documents on your local machine.        
       2. Open the Desktop_Icons folder, then copy and paste the icons
          in the folder to the public desktop (a hidden folder), 
          available at C:\Users\public\desktop.        
       3. Add or create other shortcuts here, as needed, so they will 
          appear on the public desktop. 

   4.3 Login Issues on Windows Domain Server
   
       If the maxView login account doesn’t have local administrative 
       rights, login will fail with an error message: 'Invalid Username
       or Password'. On domain servers running later versions of Microsoft
       Windows Server, where no local administrator exists or can be 
       created, maxView login is not possible. Use ARCCONF to create 
       and manage arrays.
       
   4.4 Hot Spare Issues

       After using a hot spare to successfully rebuild a redundant 
       logical drive, maxView Storage Manager will continue to  
       report the drive as a global hot spare. To remove the hot  
       spare designation, delete it in maxView Storage Manager.     
   
   4.5 Dual-Controller Systems
       
       In dual-controller systems, the controller order in maxView
       Storage Manager and the BIOS differs. Example: with an
       Adaptec 72405 and 7805 installed, the BIOS reports 
       the 72405 as controller 1 and the 7805 as controller 2; 
       in the GUI, the controller order is reversed.
          
   4.6 Email Notifications
   
       o On Linux systems, we recommend adding the SMTP host name
         to the /etc/hosts file. Doing so ensures that email 
         notifications will succeed if you specify the email 
         server in maxView Storage Manager by host name. Otherwise, 
         email notifications (including test messages) may fail if
         the DNS is unable to resolve the host hame. 
         
         WORKAROUND: specify the email server in maxView Storage
         Manager by IP address.

       o On CentOS 5.9 x64, email notifications may not be sent for 
         logical drive creations, degraded logical drives, or logical 
         drives that are rebuilding or fully rebuilt.
                   
   4.7 SGPIO Enclosures
       
       In this release, maxView Storage Manager does not show connector
       information for SGPIO enclosures.
         
   4.8 Non-RAID Mode Controllers
       
       maxView Storage Manager can "see" RAID controllers operating
       in HBA mode or Auto-Volume mode (Adaptec Series 7 and Adaptec 
       Series 8 controllers only). However, to change the controller 
       mode, you must use ARCCONF or the BIOS.       
       
   4.9 RAID-Level Migrations
    
       o The following RAID-level migrations (RLM) are supported in
         this release:
       
         RAID 0 to RAID 5
         RAID 0 to RAID 10
         RAID 5 to RAID 6
         RAID 6 to RAID 5
         RAID 10 to RAID 5
         RAID 5 to RAID 10
         RAID 1 to RAID 5
         SIMPLE VOLUME to RAID 1
         RAID 1 to SIMPLE VOLUME

       o A RAID 5 to RAID 6 RLM with >2TB logical drives is not 
         supported in this release.
         
       o RLM from a 4-drive RAID 6 to a 3-drive RAID 5 is not
         supported in this release. (The RLM fails with an 
         "insufficient number of drives" error.)

       o When migrating a Simple Volume to RAID 1, maxView Storage
         Manager reports the logical drive state as Impacted (rather
         than Reconfiguring); this is normal.

       o We do not recommend performing a RAID-level migration or 
         Online Capacity Expansion (OCE) on a logical drive with 
         maxCache SSD caching enabled.
         
         NOTE: maxView Storage Manager grays out the options for logical
         drives with maxCache enabled. ARCCONF terminates the task.
       
       o Always allow a RAID-level migration to complete before creating
         a support archive file. Otherwise, the support archive will 
         include incorrect partition information. Once the migration is
         complete, the partition information will be reported correctly.

  4.10 maxCache Container Migration
   
       Only one maxCache Container is supported per controller. Moving
       the maxCache Container (all underlying SSDs) from one
       controller to another (assuming both controllers support 
       maxCache) is supported only if (1) the new controller does not 
       have a maxCache Container or any other container with a 
       conflicting container number and (2) only after a clean shutdown
       on the old controller.
            
  4.11 Display and Refresh Issues
     
       o We do not recommend using multiple browsers simultaneously
         on the same maxView instance. Doing so may cause display
         issues or even freezes; to restore maxView, refresh
         the display by pressing F5.
       
       o When using maxView Storage Manager and the CLI concurrently, 
         configuration changes may not appear in the maxView Storage 
         Manager GUI until you refresh the display by pressing F5.

  4.12 Browser Issues
          
       o To run maxView Storage Manager on the supported browers,
         Javascript must be enabled. 

       o With Microsoft Internet Explorer 10, the maxView help system
         may not display the "toc" (navigation) pane or properly 
         resolve links with the default Security settings. 
         
         WORKAROUND: Change the Security setting in Internet Options 
         from High to Medium. Alternative: add the GUI IP address to  
         the trusted sites list.
         
       o With Microsoft Internet Explorer 10, the controller 
         firmware update wizard does not show the f/w update   
         file name when the upload completes. To refresh the
         display, click Next then Back.

       o With Microsoft Internet Explorer 8, the Verify maxCache
         dialog box displays square borders on a radio button control
         with three options. Normally, radio buttons have a round
         border. Functionally, the control acts like a radio button, 
         where you can select only one option at a time.
           
  4.13 Remote System Access on Linux and Windows
       
       To avoid remote system access failures from Linux and Windows 
       clients running maxView Storage Manager, check and update one 
       or all of the following system and network settings:
       
       Windows:
       
       o Ensure that the DNS server information is properly configured
       
       RHEL/Linux:
       
       o Set server.properties file permissions to at least read-only at all levels

         1. Stop all maxView services. 
         2. Set the Permissions of server.properties file to read and write or read-only 
            at all levels (Owner, Group and Others). Apply and close. 
         3. Restart all services in the given order - cim, agent, tomcat 
         4. Now try to remote login to this system from any other system 
       
       o Check/update these network settings:
       
         1. Disable SELinux 
         2. Disable firewall.
         3. Disable the ipv6 in the system, if ipconfig shows both ipv4 and ipv6 address. 
         4. Remove the virtual bridge virbr0, if present
         5. Enter local ip address in 'localip' parameter in server.properties file 
                   
  4.14 Power Management Issues
   
       o Power management is not supported under FreeBSD.
       
       o In maxView Storage Manager and ARCCONF, you can enable power
         management for a logical drive comprised of SSDs or a mix of
         SSDs and HDDs. However, the firmware does not apply power 
         management on the SSDs. 

       o In maxView Storage Manager, the Logical Drive Creation wizard
         does not save the power management setting after the logical
         drive is created. It is always disabled. 
         
         WORKAROUND: enable power management for the logical 
         drive with the Set Properties action.
  
  4.15 RAID 50/RAID 60, Max Drives
   
       The maximum number of drives in a RAID 50 or RAID 60 differ
       between maxView Storage Manager, ARCCONF, and the BIOS:
       
       o BIOS and ARCCONF: 128 drives max
          
         RAID 50 - From 2-16 legs with 3-32 drives/leg
         RAID 60 - From 2-16 legs with 4-16 drives/leg
    
       o maxView Storage Manager:  
       
         Assumes 2 legs for RAID 50/RAID 60 (non-selectable)
         RAID 50 3-32 drives/leg (64 total) 
         RAID 60 4-16 drives/leg (32 total)

  4.16 RAID 10 Segment Order
  
       maxView Storage Manager and the Ctrl-A BIOS report the wrong
       segment order for RAID 10s, regardless of the order in which
       the drives are selected. 
           
       Example 1:  Create RAID 10 with 2 SDDs and 2 HDDs in maxView Storage Manager:
           
       (1a) ARCCONF and maxView Storage Manager see the following RAID segment order:
                 Device 2 (S1)
                 Device 1 (H2)
                 Device 3 (S2)
                 Device 0 (H1)
   
       (1b) the BIOS/CTRL-A sees the following RAID segment order:
                 Device 2 (S1)
                 Device 1 (H2)
                 Device 0 (H1)
                 Device 3 (S2)
   
       (1c) the correct and expected RAID segment order is:
                 Device 2 (S1)
                 Device 0 (H1)
                 Device 3 (S2)
                 Device 1 (H2)
                
       Example 2:  Create RAID 10 with 2 SDDs and 2 HDDs with ARCCONF:
  
       (2a) the BIOS/CTRL-A sees the following RAID segment order:
                      Device 0 (H1)
                      Device 2 (S1)
                      Device 1 (H2)
                      Device 3 (S2)
  
       (2b) ARCCONF and maxView Storage Manager see the correct RAID segment order:
                      Device 2 (S1)
                      Device 0 (H1)
                      Device 3 (S2)
                      Device 1 (H2)
  
  4.17 RAID 10 Rebuild Order 
   
       With a degraded RAID 10 logical drive, the drive is rebuilt
       one leg at a time, not in parallel.  
         
  4.18 Verify with Fix
  
       In maxView Storage Manager and ARCCONF, the Verify with Fix
       operation is NOT available when: 
       
       1. The logical drive has a non-redundant RAID level
       2. Other tasks are in progress on the logical drive
       3. The logical drive is in a non-optimal or impacted state
       4. The logical drive is Quick initialized (ARCCONF only)
                  
  4.19 Logical Drive Wizard Issues
  
       After saving the controller configuration with the Save 
       Configuration option on the Ribbon, the Logical Drive Wizard
       opens with a 'No Records Found' error. 
       
       WORKAROUND: stop the maxView Storage Manager Agent, then stop
       the maxView web server. Restart the services in the same order.

  4.20 ATA Secure Erase
  
       In ARCCONF, the ATA Secure Erase operation cannot be aborted.
       Once started, it continues to completion. 
       
       NOTE: ATA Secure Erase is also available in the Ctrl-A BIOS. 
       and maxView Storage Manager.

  4.21 ARCCONF Backward Compatibility

       ARCCONF is backward compatible with older Adaptec controller
       models. As a result, the ARCCONF user's guide and online help
       show command options that are not supported by newer Adaptec
       controllers, like the Adaptec Series 7 and Adaptec Series 8. 
       
       Examples: 
       
       o With ARCCONF CREATE, Adaptec Series 7 and Series 8 controllers
         do not support 16KB and 32KB stripe sizes or RAID 5EE        
       
       o With AARCCONF SETMAXCACHE, Adaptec Series 7 and Series 8 
         controllers do not support ADDTOPOOL or REMOVEFROMPOOL
                                     
  4.22 ARCCONF Silent Installation
  
       ARCCONF silent installation fails using the command line format
       of the maxView setup program. After executing the command below, 
       ARCCONF is not installed on the system:
       
       setup_asm_x64.exe /s /v""/qb ADDLOCAL=CLITools USERNAME=administrator PASSWORD=pmc@123 CONFIRMPASSOWORD=pmc@123 /lv* c:\pmc.log""
       
       WORKAROUND: Install ARCCONF with the maxView GUI installation wizard.

  4.23 MAXCONF Logical Drive Status Issues
  
       After deleting a logical drive in maxView Storage Manager,
       the MAXCONF GETCONFIG command lists the drive status as 
       'Offline'. If the logical drive is not part of any maxCache Plus
       virtual pool, the drive is removed from the list after reboot.
   
  4.24 Special Characters in Logical Device Names
  
       Special characters are permitted in logical device names
       in maxView Storage Manager, the BIOS, and ARCCONF. However,
       with Linux ARCCONF (create, setname), special characters  
       must be "escaped" to ensure proper interpretation. For 
       example:
              
       ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\& 

  4.25 Virtual Pool Delete Error
  
       maxView Storage Manager reports an error if you try to delete
       an offline maxCache Plus virtual pool. This behavior is per design.
       
       WORKAROUND: Ensure that the virtual pool is online, then delete it.
  
  4.26 Adaptec Series 6 Controller Issues
        
        The following issues are seen only with Adaptec Series 6 RAID
        controllers:

        o Renaming a RAID volume disables the write-cache (if enabled).
          You cannot re-enable the write-cache in maxView Storage Manager.
          
          WORKAROUND: Use ARCCONF to enable the write-cache.
        
        o In a VMware Guest OS under VMware ESXi 4.1 or 5.x, maxView 
          Storage Manager and ARCCONF do not correctly identify existing
          logical drive partitions. In ESXi 5.x the partition isn’t 
          detected; in ESXi 4.x, it sees a partition when none exists. 
          As a result, attempting to delete, clear, or erase the logical
          drive may fail.

        o Adaptec Series 6 controllers do not support the ARCCONF GETPERFORM
          command.

  4.27 Speaker Status on SuperMicro SAS2X28 Enclosures

       SuperMicro SAS2X28 enclosures do not propagate the speaker
       status to maxView Storage Manager. As a result, maxView always
       displays the speaker status as Off.

  4.28 Online Help Issues 

       o In the maxView Storage Manager online help, some links
         show the full file path to the topic rather than the
         topic title. The link itself is unaffected. See also 
         'Browser Issues' in Section 4.12.
         
       o When opening the maxView Storage Manager help from a remote
         Linux system (eg, over a VPN), the help window may fail to open
         with a 'can't establish connection to server' message.
         
         WORKAROUND: replace 127.0.0.1:8443 in the URL with <system_ip_address>:8443
         
       o Context help in the Virtual Volume wizard (displayed when you 
         click the '?' icon) does not have corresponding entries in TOC
         panel on the left side of the help system. 
         
  4.29 Uninstallation Issues
       
       o When using the 'Modify' option on a Windows system to 
         uninstall maxView Storage Manager, the 'Adaptec' folder   
         is not removed from the file system.
                       
       o After uninstalling maxView Storage Manager from a Linux system,
         log files in the root directory are not removed. 
           
--------------------------------------------------------------------
(c) 2014 PMC-Sierra, Inc. All Rights Reserved. 

This software is protected under international copyright laws and 
treaties. It may only be used in accordance with the terms 
of its accompanying license agreement.

The information in this document is proprietary and confidential to
PMC-Sierra, Inc., and for its customers' internal use. In any event,
no part of this document may be reproduced or redistributed in any
form without the express written consent of PMC-Sierra, Inc.,  
1380 Bordeaux Drive, Sunnyvale, CA 94089.

P/N DOC-01768-03-A Rev B              

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: