arcconf romupdate

Description

Allows new firmware and BIOS to be flashed to the controller. A reboot is required for the new firmware to take effect.

Note:
  1. This command is supported in Windows and Linux only.
  2. You can download the UFI update files from the Support area on the Adaptec Web site at www.adaptec.com.

Syntax

ARCCONF ROMUPDATE <Controller#> <BaseName> [Newversion <build#> [Force]] [noprompt]

Parameters

Controller#
The controller number
BaseName

The name of the ROM image basename or the fully qualified name if you have a set of controller ROM images.

Note: All UFI files must be in the same directory prior to invoking ARCCONF.
Newversion <build#>
Specifies the version of the firmware build.
Force
An optional parameter used to force a down-level firmware update.
Noprompt
An optional parameter that suppresses the confirmation prompt.

Examples

ARCCONF ROMUPDATE 1 AC2200 
ARCCONF ROMUPDATE 1 AC220001.UFI
ARCCONF ROMUPDATE 1 AS483C newversion 12345 force noprompt

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: