Updating the Controller Firmware

Note: This option is available in the uEFI interface only.

Use this option to flash the controller's firmware.

To update the controller firmware:

  1. Start the ARC utility in uEFI mode (see Ctrl-A or uEFI/HII?).
  2. Select Administration, then select FW update from Media.
  3. Select the device you want to flash, then press Enter.
  4. Browse the folder hierarchy, select the firmware update (.UFI) file, then press Enter.
  5. Select Update Firmware. The firmware is sent to the controller and the system verifies the operation to ensure that it was successful.
  6. When the verification is complete, press Enter to reboot the server.

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: