Modifying Power Management Settings

Power management settings switch the array to low power state when it is inactive for a specific time.

To modify power management settings:

  1. Select Manage Arrays from the Logical Device Configuration menu.
  2. Select the array, then press Ctrl+W.

    In the power management console, enter these details:

    Option

    Description

    Power Management

    When enabled, switches the array to low power state, when the array/drive is inactive.

    Slow Down Drive After

    The duration of inactive state of the array/drive after which it is slowed down to low power mode. This is an optional setting.

    Note: The disk drive should support low power mode.

    Power Off Drive After

    The duration of inactive state of the array/drive after which it is powered off. This is an optional setting.

    Note: Power Off Drive After duration should be greater than Slow Down Drive After Duration.

    Verify Drive After

    The regular time interval at which the system performs a health check of the array/drive.

Email Address (optional):

Did this topic answer your question?

Strongly Agree
Agree
Neutral
Disagree
Strongly Disagree

Comments: