CD-ROM Drives:
Apple:
CD-SC (Sony CDU-8001)
CD-SC Plus (Sony CDU-8002)
CD-150 (Sony CDU-8002)
CD-300 (Sony CDU-8003)
Power CD
CD Technologies:
Porta-Drive (Toshiba 3201/3301/3401)
Chinon:
CDS-431
CDX-431
CDX-435
CDX-535
Denon:
DRD-253
Goldstar:
GCD-R300
Hitachi:
CDR-1553S*
CDR-1650
CDR-1750S*
CDR-3650*
CDR-3750
CDR-6750
IBM:
3510* (CD-ROM I, CD-ROM II)
Laser Magnetics:
CM212*
CM214*
CM231*
MediaVision:
CDR-H93MV
Reno
NEC:
CDR-25
CDR-35
CDR-36
CDR-37
CDR-38
CDR-55
CDR-72
CDR-73
CDR-73M
CDR-74
CDR-74-1
DR-80
CDR-82
CDR-83
CDR-83M
CDR-84
CDR-84-1
CDR-210
CDR-400
CDR-500
CDR-510
CDR-600
CDR-900 (NEC 3Xe, 3Xi, 3Xp, 4xPro)
CDR-401
CDR-501
Panasonic:
CR-501-S
CR-503
Philips:
CM-425A
CM215
Pioneer:
DRM-600
DRM-600A*
DRM-604x* 6-disc changer
Plextor:
4Plex
Sanyo:
CRD-400I
Smart & Friendly:
CD-600
CD-800
HS-1200
HS-2200
SFD-21
Sony:
CDU-541
CDU-561
CDU-6110
CDU-6111
CDU-6211
CDU-6811
CDU-7211
CDU-8012
Teac:
CD-50
Texel:
DM-3010
DM-3020
DM-3021
DM-3022
DM-3024
DM-3028
DM-3110
DM-3120
DM-5010
DM-5020
DM-5021
DM-5022
DM-5024
DM-5028
Toshiba:
XM-3201
XM-3301
XM-3401
XM-5100A
SCSIworks! CD-ROM drivers default to SCSI-2 mode, so will support all new
CD-ROM drives that are SCSI-2 compliant. Note that not all CD-ROM drives
support all possible operations, especially Photo CD and audio operations.
Hard Disk Drives:
Trantor's hard disk driver supports virtually all available embedded-SCSI
hard disk drives that will spin up when power is applied.
Magneto-Optical Drives (512 Byte Media):
Fujitsu:
M2511A
Panasonic:
LF-3004
IBM:
MD-3125A*
Ricoh:
3010
5030E
5030E2
5031E
Maxoptix:
Tahiti I
Tahiti II
Tahiti III
Sharp:
JY7000
MOST:
RMD-5100-S
5200
Sony:
SMO-301
SMO-501
Olympus:
MOS-300E
Teac:
OD-3000
Optimum:
750
Removable-Media Devices:
Bernoulli:
45
90**
Quadram:
QuadFLEXTRA
Insite:
Floptical
SyQuest:
44
88
Iomega:
Floptical*
Teac:
3 1/2" & 5 1/4" SCSI floppy drives (FD-55GS, FD-235JS)
Scanners
Hewlett-Packard:
ScanJet IIp
ScanJet IIc
Other scanner manufacturers that provide ASPI drivers will also work with
the Trantor ASPI Managers.
* These SCSI devices do not provide termination power, and therefore will
not work with the APA-338 MiniSCSI, APA-348 MiniSCSI Plus or APA-358
MiniSCSI EPP adapters, unless daisy-chained with other SCSI devices
which provide termination power
** Some Bernoulli 90 Pro portable models do not provide termination power,
and therefore will not work with the APA-338 MiniSCSI, APA-348 MiniSCSI
Plus or APA-358 MiniSCSI EPP adapters, unless daisy-chained with other
SCSI devices which provide termination power. Contact Iomega Corporation
for details about availability of termination power on specific models
and for information on internal term power jumpers.
Information supplied by Adaptec, Inc. is believed to be accurate and
reliable, but Adaptec assumes no responsibility for any errors that may
appear in this Support List. Adaptec, Inc. reserves the right, without
notice, to make any change in product design or specification.
|