CD-ROM Drives:

Apple:
CD-SC (Sony CDU-8001)
CD-SC Plus (Sony CDU-8002)
CD-150 (Sony CDU-8002)
CD-300 (Sony CDU-8003)
Power CD

CD Technologies:
Porta-Drive (Toshiba 3201/3301/3401)

Chinon:
CDS-431
CDX-431
CDX-435
CDX-535

Denon:
DRD-253

Goldstar:
GCD-R300

Hitachi:
CDR-1553S*
CDR-1650
CDR-1750S*
CDR-3650*
CDR-3750
CDR-6750

IBM:
3510* (CD-ROM I, CD-ROM II)

Laser Magnetics:
CM212*
CM214*
CM231*

MediaVision:
CDR-H93MV
Reno

NEC:
CDR-25
CDR-35
CDR-36
CDR-37
CDR-38
CDR-55
CDR-72
CDR-73
CDR-73M
CDR-74
CDR-74-1
DR-80
CDR-82
CDR-83
CDR-83M
CDR-84
CDR-84-1
CDR-210
CDR-400
CDR-500
CDR-510
CDR-600
CDR-900 (NEC 3Xe, 3Xi, 3Xp, 4xPro)
CDR-401
CDR-501

Panasonic:
CR-501-S
CR-503

Philips:
CM-425A
CM215

Pioneer:
DRM-600
DRM-600A*
DRM-604x* 6-disc changer

Plextor:
4Plex

Sanyo:
CRD-400I

Smart & Friendly:
CD-600
CD-800
HS-1200
HS-2200
SFD-21

Sony:
CDU-541
CDU-561
CDU-6110
CDU-6111
CDU-6211
CDU-6811
CDU-7211
CDU-8012

Teac:
CD-50

Texel:
DM-3010
DM-3020
DM-3021
DM-3022
DM-3024
DM-3028
DM-3110
DM-3120
DM-5010
DM-5020
DM-5021
DM-5022
DM-5024
DM-5028

Toshiba:
XM-3201
XM-3301
XM-3401
XM-5100A

SCSIworks! CD-ROM drivers default to SCSI-2 mode, so will support all new CD-ROM drives that are SCSI-2 compliant. Note that not all CD-ROM drives support all possible operations, especially Photo CD and audio operations.

Hard Disk Drives:
Trantor's hard disk driver supports virtually all available embedded-SCSI hard disk drives that will spin up when power is applied.

Magneto-Optical Drives (512 Byte Media):

Fujitsu:
M2511A

Panasonic:
LF-3004

IBM:
MD-3125A*

Ricoh:
3010
5030E
5030E2
5031E

Maxoptix:
Tahiti I
Tahiti II
Tahiti III

Sharp:
JY7000

MOST:
RMD-5100-S
5200

Sony:
SMO-301
SMO-501

Olympus:
MOS-300E

Teac:
OD-3000

Optimum:
750

Removable-Media Devices:

Bernoulli:
45
90**

Quadram:
QuadFLEXTRA

Insite:
Floptical

SyQuest:
44
88

Iomega:
Floptical*

Teac:
3 1/2" & 5 1/4" SCSI floppy drives (FD-55GS, FD-235JS)

Scanners

Hewlett-Packard:
ScanJet IIp
ScanJet IIc

Other scanner manufacturers that provide ASPI drivers will also work with the Trantor ASPI Managers.

* These SCSI devices do not provide termination power, and therefore will not work with the APA-338 MiniSCSI, APA-348 MiniSCSI Plus or APA-358 MiniSCSI EPP adapters, unless daisy-chained with other SCSI devices which provide termination power

** Some Bernoulli 90 Pro portable models do not provide termination power, and therefore will not work with the APA-338 MiniSCSI, APA-348 MiniSCSI Plus or APA-358 MiniSCSI EPP adapters, unless daisy-chained with other SCSI devices which provide termination power. Contact Iomega Corporation for details about availability of termination power on specific models and for information on internal term power jumpers.

Information supplied by Adaptec, Inc. is believed to be accurate and reliable, but Adaptec assumes no responsibility for any errors that may appear in this Support List. Adaptec, Inc. reserves the right, without notice, to make any change in product design or specification.