THIS PROCEDURE ASSUMES THAT AN SCO UNIX SYSTEM IS AVAILABLE WITH A 5 1/4"
FLOPPY AS THE A: DRIVE AND A 3 1/2" FLOPPY AS THE B: DRIVE
- Make sure 3 1/2" driver diskette is write protected.
- Make sure you are logged in as root with # prompt, and get into floppy disk file system creation program by typing: mkdev fd<ENTER>
- Choose option 2 (96TPI, DOUBLE SIDED 15 SECTORS PER TRACK) from the first menu.
- Reply to the following prompts:
DO YOU WANT TO USE FLOPPY DRIVE 0 OR 1?
Choose option 0.
CHOICES FOR CONTENTS OF FLOPPY FILESYSTEM?
Choose option 1 (FILESYSTEM).
INSERT A 96DS15 FLOPPY INTO DRIVE AND PRESS <RETURN> TO CONTINUE OR Q TO QUIT.
Insert a blank 5 1/4" disk into the A: drive and press <ENTER>.
WOULD YOU LIKE TO FORMAT THE FLOPPY FIRST?(Y/N).
Choose Y. System will now format and verify format of floppy.
DO YOU WANT TO USE THE DEFAULT FILE SYSTEM TYPE AFS?(Y/N)
Choose N.
PLEASE ENTER A FILE SYSTEM TYPE FROM <AFS EAFS S51K XENX) OR Q TO QUIT.
Choose S51K.
Now you will be back to the first menu. Press Q to get back to a # prompt.
- Type: mount /dev/fd096ds15 /mnt<ENTER>.
- Type: mkdir /mnt2<ENTER>.
- Insert the 3 1/2" driver disk into the B: drive.
- Type: mount /dev/fd1135ds18 /mnt2<ENTER>.
- Type: copy -rom /mnt2 /mnt<ENTER>.
- Type: umount /mnt<ENTER>.
- Type: umount /mnt2<ENTER>.
- Now remove both floppy disks from the drives. You now have a 5 1/4" version of the Adaptec SCO Unix driver. You can install the driver using the installpkg program or use it as a boot time loadable driver for a fresh install.
If you are doing a fresh install using our driver as a boot time loadable driver, boot from N1 install diskette. When you get to the : prompt type in link<ENTER>. When the system asks which driver you wish to load type alad if you are using the 294x/aic7870 card/chip or arad if you are using the 274x/284x/aic7770 card/chip. You will be prompted to insert our driver disk. Put in our disk and follow the regular Unix installation procedure.
|
|