 |
 |  |  |  |
 |
 |  |
 |
Home obsolete products AHA-1744 |
| AHA-1744 |
The Adaptec AHA-1744 EISA-to-Fast SCSI Host Adapter has been designed to operate as shipped in standard EISA class computer.
|
Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications Select your operating system or software below |
|
Bios Updates and Other Downloadable FilesBios Updates and Other Downloads IBM OSIBM OS-2 |
Novell NetWareNovell NetWare Downloads |
|
|
|
|
|
| Number of devices | |
| 7 SCSI devices maximum per host adapter (7 internal or 7 external or any combination of 7 internal or external | |
|
Bus System Interface Type |
|
| 32-bit; for EISA bus based computers | |
| External Connectors | |
| Built-in 50-pin high density (SCSI-2) connector | |
| Internal Connectors | |
| 50-pin standard | |
| Data Transfer Rate | |
| Up to 33 MBytes/sec bus master DMA transfer rate burst on EISA busUp to 2MBytes/sec asynchronous, 5 MBytes/sec synchronous10 MBytes/sec fast synchronous (Fast SCSI) on the SCSI bus | |
| Package Contents | |
| AHA-1744 Differential Host AdapterConfiguration SoftwareInstallation Guide | |
| Warranty | |
| 5 years | |
|
Floppy Support The AHA-1744 has no floppy drive support Termination Active-use system ECU (EISA Configuration Utility) to enable/disable termination Board Dimensions 13 3/8" L x 5/8" W x 5" H Power Consumption +5.0 +/- 0.25 at 2.9 amps max Operating Characteristics 0°C - 55°C Storage Characteristics 0°C - 55°C MTBF (mean time between failures, Bellcore) 54,856 hours MTTR (mean time to repair) 30 minutes |
