Features:
- Supports 10 Mbits/sec system throughput for IEEE 802.3
10BASE-T networks; Full Duplex support provides up to 80
Mbits/sec cumulative throughput
- Supports 100 Mbits/sec system throughput for IEEE 802.3u
100BASE-TX networks; Full Duplex support provides up to 800
Mbits/sec cumulative throughput
- NWAY compatible AutoSensing of maximum line speed
- Easy migration path from 10BASE-T to 100BASE-TX
- Runs on Category 3, 4, or 5 UTP cable for 10 Mbits/sec
operation, and CAT 5 UTP and IBM Type 1 STP for 100
Mbits/sec operation
- 132 MBytes/sec burst data rate across the PCI bus for
maximum performance and low CPU utilization
- Self-configuring design for "plug and go"operation
- Integrated 2 KByte transmit and 4 KByte receive FIFOs
(First In, First Out memory) on each channel
- Predictive PipeliningT for greater throughput and lower CPU
utilization
- All popular networks supported
- Comprehensive setup and diagnostics utility
- Limited lifetime warranty
Quartet/440 TX provides ultimate performance for PCI servers
operating on 10BASE-T Ethernet or 100BASE-TX Fast Ethernet
technology. Quartet/440 TX supports up to four network
segments on four independent channels-for cumulative
throughput of 400 Mbits/sec., or 800 Mbits/sec. with Full
Duplex operation. This high speed adapter multiplies
flexibility, performance and Full Duplex capability by four
to provide the easiest migration possible from 10BASE-T to
100BASE-TX Fast Ethernet.
AUTOSENSE CONFIGURATION PROVIDES FLEXIBILITY
The AutoSense feature of Quartet/440 TX allows the adapter to
detect the maximum line speed of your network automatically. Simply
connect the Quartet/440 TX into any existing 10BASE-T or
100BASE-TX network device, no adapter configuration
required. For maximum flexibility, this AutoSense feature
works with all 10 and 100 Mbits/sec. devices, including
those without NWAY line speed negotiation.
DESIGN INNOVATION FOR FAST ETHERNET
There's no limit to how you can use your
Quartet/440 TX. Here are just a few examples.
PROVIDE A BRIDGE BETWEEN STANDARD 10 MBPS AND FAST ETHERNET.
Each Quartet/440 TX port configures line speed dynamically and
automatically-connect one or more of the Quartet's ports to
standard Ethernet hubs and printers, and connect the other
ports to Fast Ethernet repeaters. The Quartet server bridges
between network speeds for you. Choose the best port
configuration for your network.
DOUBLE THE PERFORMANCE WITH FULL DUPLEX SUPPORT
Use a Quartet/440 TX with a Fast Ethernet switch to double
the throughput of your server. Quartet/440 TX drivers easily
configure to support Full Duplex operation at either 10
Mbits/sec or 100 Mbits/sec, for up to 800 Mbits/sec of
bandwidth on a single network adapter.
MULTIPLE QUARTETS, NOT MULTIPLE SERVERS
Add a Quartet to your server and
instantly gain four new segments. Streamline your network
operations by adding multiple Quartet adapters to a single
server. The bandwidth capacity of multiple Quartets means
more room for growth, without adding expensive servers to
your network.
PRODUCT SPECIFICATIONS
SYSTEMS SUPPORTED
PCI Local Bus servers
BUS INTERFACE
PCI, 32-bit bus master
FAST ETHERNET CONTROLLER
DECchip 21140 LAN coprocessor chip (4)
HARDWARE INTERRUPTS
PCI interrupt A
Supports shared interrupts
BASE IO OR MEMORY ADDRESS
Assigned by BIOS
PCI CONFIGURATION SPACE
Supports DWORD, WORD, and BYTE access
RELIABILITY
Calculated MTBF>100,000 hours
POWER REQUIREMENTS
+5 volts @ 3.5 Amp max
ENVIRONMENTAL OPERATING RANGE
Temperature: 00C to 500C
Relative Humidity: 5% to 85% non-condensing
Altitude: 3000m maximum
INTERFACE CONNECTIONS
RJ-45 female (4)
supports CAT 3, 4, and 5 UTP for 10Mbits/sec operation,
supports CAT 5 UTP and IBM
Type 1 STP for 100 Mbits/sec operation
FULL DUPLEX SUPPORT
Full Duplex Support at 10 Mbits/sec and 100 Mbits/sec on each port
DIMENSIONS
12" x 4.2" (conforms to PCI Long Card specification)
STANDARDS COMPLIANCE
FCC Class A, CE Class A
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
DRIVERS AVAILABLE
3.5" diskette, NetWare 3.x, 4.x, IBM LAN Server, OS/2 Warp, DOS NDIS 2.0, Windows 95, Windows NT 3.51
DIAGNOSTIC LEDS
Link Integrity for each channel (4)
Network Activity for each channel (4)
WARRANTY
All eMASTER+ series adapters are protected by a limited lifetime warranty
ORDERING INFORMATION
Order Number |
Connectors |
EM440TX |
RJ-45 (4) |
|