Adaptec
 
leftbar
leftbar
ACB-3530
ACB-3530 is designed to provide the performance and flexibility required to reliably operate a QIC-36 1/4" tape drive for streaming backup of system data.
Small Image of ACB-3530
DownloadsDocumentationTechnical Specifications
No drivers are currently available for this product from Adaptec.
There are a few possible reasons for this:

- The product is supported by embedded drivers that are available in the supported operating systems.

- The product is supported by drivers that are embedded in the product.

- The product was recently introduced and there are no new drivers available.
Policies
obsolete product info (html 69 kb)
Product Documentation
User Guide for the ACB-3530 (PDF 486 KB)

The ACB-3530 Features

Full SCSI specification, ANSI x3.331-1986 compatibility
Connects to any SCSI standard host adapter
SCSI bus arbitration and disconnect/reconnect support
Overlapped disk/tape operation capability with multitasking I/O subsystems
Buffered write and immediate command completion support
Data buffering and immediate completion mode for streaming on systems that do not support SCSI bus disconnect/reconnect
QIC-24 and QIC-11 media format support. Capable of reading and writing QIC-24 and QIC-11 format tapes
16-Bit CRC on each record and SCSI bus parity. Data integrity is assured by reading the data and checking CRCimmediately after it is written. CRC is also checked on tape reads. In addition, SCSI bus parity is checked or generatedon all bus transfers.
Automatic tape defect handling. Media defects detected by the controller from read after write will result in the data being rewritten in the next sequential block.
Reserve/Release. The tape drive can be reserved by an attached host to restrict other host accesses to the data.

Power Consumption

+5 VDC +/- 5%, 1.8 Amps (max)
+12 VDC +/- 10% at 100 mAmp(max)

Operating Characteristics

0°C to 55°C (32°F to 131"F)
10% to 95% non-condensing relative humidity
Altitude: 0 to 10,000 MSL

Storage Characteristics

-40°C to 75°C (-40°F to 167°F)
Altitude: 0 to 10,000 MSL

MTBF (mean time between failures, Bellcore)

20,000 at 55° C

---