|
The following list of DIMMs (Dual In-line Memory Modules) have been approved by Adaptec for use with the
Adaptec SCSI RAID 2100S, 3210S, 3410S and Adaptec ATA RAID 2400A cards.
| SDRAM Memory Module |
Supplier Name |
Part# |
Height |
| 32MB, 4M x 72, ECC |
Crucial |
CT4M72S4D8E (retail) |
1.00" (25mm) |
| Wintec (NEC DRAM) |
W9Q304727MB-222K |
1.00" (25mm) |
| 64MB, 8M x 72, ECC |
Crucial |
CT8M72S4D8E (retail) |
1.38" (35mm) * |
| Wintec (NEC DRAM) |
32753383 (retail) |
1.00" (25mm) |
| Wintec (NEC DRAM) |
W9Q308727KD-222K (OEM) *** |
1.00" (25mm) |
| 128MB, 16M x 72, ECC ** |
Wintec (NEC DRAM) |
32763383 (retail) |
1.00" (25mm) |
| Wintec (NEC DRAM) |
W9Q316727KD-222K (OEM) *** |
1.00" (25mm) |
Additional DIMMs are currently undergoing certification. We will add them to this list as they are
qualified.
If you are unable to locate the above DIMMs from your supplier, other popular non-buffered, 3.3V,
168-Pin PC100 SDRAM DIMMs may also be compatible. Adaptec recommends using ECC SDRAM DIMMs.
* This 64MB Micron DIMM has been tested compatible with the Adaptec SCSI RAID 2100S by Adaptec labs.
However, the height of the DIMM will extend beyond the height of the card by 0.118" (3mm).
** SMOR will identify the 128 MB DIMM under Attached Modules as "0 MB", or it may not see it
at all. This only occurs within SMOR. Storage Manager, Storage Manager Pro and Raidutil identify the
DIMM capacity properly.
*** These parts are available for customers, such as OEMs, who are purchasing memory in larger quantities.
|
|